Simone自由降落救生艇模拟释放操作程序
的有关信息介绍如下：
船舶每三个月要求做一次救生艇入水操纵，每六个月要求自由降落入水或进行模拟释放。
1. 把救生艇艇架上的挂艇钢丝绳与救生艇尾部的挂艇装置相连。
Connect the wire rope of davit with the hanging plate of end of the lifeboat.
2. 将救生艇艇架吊艇钩与救生艇吊环相连，绞起钢丝绳至将要受力的状态。
Connect the hook of davit with flying ring of tne lifeboat, then recover thehook until the wire rope approach to endure the force.
3. 操作人员穿好救生衣进艇，坐于操作位置并系好安全带。
The Operators put on the life jacket,sit at operation seat and fasten the safety belts
4.拔出正常释放装置上的安全锁紧销。
Pull out the safety pin of the release appliance.
5.将释放手柄从锁紧位置转到释放位置，救生艇靠自身重力降落下水。
Put the release handle from the lock position to the release position to release the boat.
